Can pushback rack be used in Jessup freezer and cooler rooms?

Yes. Fewer aisles mean less conditioned space per pallet. We confirm pallet type, load weight and cart rating for the cold environment during design.

Is pushback right for produce or dated food near the Maryland Food Center?

Only for items that are not date-critical, because lanes run last in, first out. Short-dated product usually goes to pallet flow for first in, first out rotation.

Pushback or drive-in for a Jessup freezer?

Drive-in stores more per footprint for a few deep SKUs. Pushback gives more separate faces and keeps trucks out of the lanes. Your SKU count decides it.

What should I send for a Jessup pushback quote?

Pallet size and type, heaviest load, pallets per SKU, room clear heights and footprint. We return a free CAD layout and an itemized quote.

Pushback Rack system inside a Maryland warehouse

Jessup, Maryland

Pushback Rack in Jessup, Maryland

Pushback rack in Jessup gets serious consideration in cooler and freezer rooms, because every square foot there costs energy to keep cold and aisles are expensive space.

Lanes two to six pallets deep, carts on sloped rails, one loading face: that is the whole idea.

(410) 305-9766

Push Back Racking in Cold Rooms Near the Maryland Food Center

Food and beverage distributors around the Maryland Food Center, US-1 and Dorsey Run Road often run cooler and freezer space next to dry storage. In the cold rooms, reducing aisles shrinks the volume you condition per pallet stored.

Pushback lets beverage cases, frozen goods and produce reserve sit several deep without a truck entering a freezer lane.

Produce wholesale near the Maryland Food Center is a case where I usually steer people away from deep lanes for perishables. A pushback rack works for packaging, crates and non-perishable stock in the same building, while perishables use flow or selective storage. Splitting it that way gets the floor savings of pushback pallet rack where it is safe to use last in, first out, and protects rotation where it is not.

High-density pushback rack lanes loaded with pallets

Pushback pallet racking showing cart rails and load beams

Rotation Rules Decide Pushback Rack or Flow

Here is the catch: pushback is last in, first out. Product with short shelf life or strict date rotation usually belongs in a Jessup pallet flow system, which feeds first in, first out.

Items that turn quickly in full lanes, or that are not date-critical, are the candidates for pushback. Many Jessup buildings run both systems in the same room.

How the Pushback Pallet Rack Lane Works

The first pallet sits on the highest cart. Each additional load pushes the stack rearward. Remove the front pallet and gravity brings the next to the face.

Pallet condition matters in cold rooms; damaged bottom boards and ice can affect cart travel, so we confirm pallet type and support during design.

Push Back Racking Depth for Beverage and Food Loads

Beverage pallets are heavy. Frame size follows total lane weight and vertical beam spacing, and carts must be rated for the load. We size from your heaviest pallet.

Lane depth follows pallets per SKU: three deep for steady items, deeper for the few that arrive by the truckload. Existing rack can sometimes accept pushback bays if the connectors match; photos tell us.

Pushback Rack Along Dorsey Run Road Dry Storage

Not every Jessup building is cold. Dry grocery and beverage warehouses along Dorsey Run Road and MD-175 stock canned goods, bottled water and paper products in volume, and pushback rack handles that reserve well.

Beverage arrives by the truckload and leaves by the pallet, so a four- or five-deep push back racking lane often stays full. Use a pallet type the carts are rated for and keep the bottom boards in good shape.

Install crews in non-air-conditioned summer buildings and cold rooms both need planning. We schedule pushback pallet rack installation by zone so receiving keeps moving.

Comparing Drive-In for Freezer Density

Drive-in is common in freezers because it packs very tight. A Jessup drive-in layout works for a few SKUs stored very deep. Pushback keeps more separate faces and keeps trucks out of lanes.

Baltimore Pallet Racks is a division of Warehouse Equipment & Supplies Co., a company supplying and installing storage systems since 1997. See the Jessup service area page or our pushback rack overview and request your free drawing.

Call (410) 305-9766